Your present location:Home > A560 FAQ

A560 FAQ


Q1: What else need to do after receiving the A560 RTF(with T8FB/T8S)?

A: The A560 RTF has been set with all parameters by fatory default. All RC fans need to do is to fix the wing onto the fuselage as they are separated for the shipping reason. Click below link to check the tutorial video


Q2: What if only the aircraft A560 is purchased (without T8FB/T8S) to work with AT10II/AT10 or AT9S/AT9? 

A: 1) When doing the binding, make sure the channel quantity of receiver. Only the ones with 10 or 12 channels can work with AT10II/AT10/AT9S/AT9. Please remember to change the channel quantity accordingly of your transmitter as below steps

 Long press the Mode key to enter the BASIC MENU -> Rotate the scroll Dial to highlight the SYSTEM option and press Push to   enter  -> Select the CH-SELECT and change the Number as required.

2) If the transmitter is Mode 2, it will automatically change to Mode 1 when the model type ACROBATICS is selected. Thus, remember  to keep the transmitter as Mode 2 once the model type is changed.

3) The travel range of AT10/AT10II/AT9/AT9S is different from that of T8FB, which is by default of A560. If pilots want to fly A560 with   the other RadioLink transmitter instead of T8FB/T8S,  travel range needs to be adjusted first.


Q3: When calibrate the flight controller of  A560 with success, why some motors rotate once and others don't?

A: It's because the calibration of each ESC by factory default varies and this is normal.


Q4: How to calibrate A560?

A: Pull both joysticks of transmitter to the both outside corners for 3 seconds, the green indicator on the flight controller flashes once means the calibration succeeds.