Your present location:Home > RC6GS Firmware upgrade

RC6GS Firmware upgrade

Latest Firmware (3-way switch Only)

click to download the firmware: RC6GS (three-way) _V6.1.2

https://www.radiolink.com/rc6gs_firmware

 

With the firmware V6.1.2, RC6GS (3-way switch Only) is capable of model battery voltage telemetry and subsidiary ID besides the dual mix control function.

Note Receiver R7FG or R8F is needed for these functions of telemetry and subsidiary ID.

 

 

How to upgrade firmware

1. Identify the suitable firmware
a. If your computer works with the system of WIN 7 or XP, please choose the firmware file with .bin at the end.
b. If your computer works with the system of WIN8 or WIN10, please choose the firmware file with .mac at the end to upgrade.
2. Download the corresponding firmware to your model from the below links 
3. Connect your radio to the computer with a USB cable and power the radio on, it will appear as an extra disc on your computer
4. Click YES as the window pops out when connected to format your radio
5. Once done formatting, your radio (the extra disc) should be empty
6. Copy the latest firmware and past it in your radio (the extra disc)
7. Once finish Step 6, disconnect your radio from the computer and repower it on

 

 

Factory Default Firmware (3-way switch Only)

click to download the firmware: RC6GS_defaultfirmwar_V3.1.5

https://www.radiolink.com/rc6gs_firmware

 

Please be kindly noted that the firmware V3.1.5 by factory setting is the fundamental ones that can realize all basic controls. Its NOT beacause Radiolink is selling the old version products in stock.

 

Latest and Factory Default Firmware (2-way switch Only)

click to download the firmware: RC6GS (two-way) _V3.1.33

https://www.radiolink.com/rc6gs_firmware