R12DSE FAQ

Q: What signal does R12DSE support?

A:  R12DSE supports SBUS signal output.

Q: What transmitters are compatible with R12DSE?

A: R12DSE is compatible with RadioLink AT series aircraft transmitters AT10II, AT10, AT9S Pro, AT9S, AT9.

Q: How do you bind R12DSE to the transmitter?

A:

1. Put the transmitter and the receiver close to each other (about 50 centimeters) and power both on.
2. Switch on the transmitter and the LED of R12DSE will start flashing slowly.

3. There is a black binding button (ID SET) on the side of the receiver. Press the button for more than 1 second and release, the LED will flash quickly, meaning the binding process is ongoing.

4. When the LED stops flashing and is always on, binding is complete and there will be a signal tower shown on top of the transmitter's screen.

Q: Why does the LED of R12DSE keep flashing slowly?

A: The slow flashing LED means binding doesn’t succeed or the signal gets lost after binding completes.

Q: What is the operating voltage range that R12DSE supports?

A: The operating voltage range of R12DSE is from 3V to 6V.