Firmwares(Please upgrade by windows computer)



Latest Firmware

RC6GS Latest Firmware V502

Firmware V502 Upgrade Instructions

Optimizes the Throttle delay function.

Note:

The telemetry function can ONLY be realized on the RC6GS 3-position switch version.


Attention: If you can not download the files when clicked the mac and bin files above or below, please click the website below to download the files you need.  

http://www.radiolink.com.cn/firmware/transmitter/RC6GS/

(2) 点击下面压缩包下载RC6GS出厂固件V3.1.5

Factory Default Firmware(3-way switch Only)


RC6GS_defaultfirmwar_V3.1.5.bin

RC6GS_defaultfirmwar_V3.1.5.mac

Please be kindly noted that the firmware V3.1.5 by factory setting is the fundamental ones that can realize all basic controls. It’s NOT because Radiolink is selling the old version products in stock.


Latest and Factory Default Firmware(2-way switch Only)


RC6GS(two-way)_V3.1.33(bin).bin

RC6GS_defaultfirmwar_V3.1.5.mac

RC6GS Firmwares

Firmware for Four Wheels Steering

Version of firmware: V_6_1_2S

Date of upgrade: 2020.11.26

Firmware designed for: RC6GS V2 & RC6GS that the mainboard signed V3.0


Upgrade Firmware Introduction:

1. This firmware is designed for the car which need four wheels steering at the same time.

With this firmware, a shortcut key enable switch turn on or turn off the four wheels steering function.

2. This function is only applicable to PMIX01, the Master Channel is default CH1 and the Slaver Channel is CH3.

3. The control switch is default SWA, press it to turn on the mix function, press it again to turn off the mix function.

How to upgrade  firmware

1. Identify the suitable firmware


a. If your computer works with the system of WIN 7 or XP, please choose the firmware file with .bin at the end.

b. If your computer works with the system of WIN8 or WIN10, please choose the firmware file with .mac at the end to upgrade.


2. Download the corresponding firmware to your model from the below links

3. Connect your radio to the computer with a USB cable and power the radio on, it will appear as an extra disc on your computer

4. Click YES as the window pops out when connected to format your radio

5. Once done formatting, your radio(the extra disc) should be empty

6. Copy the latest firmware and paste it in your radio(the extra disc)

7. Once finish Step 6, disconnect your radio from the computer and repower it on

How to | Upgrade RadioLink RC6GS​ V2/RC6GS/RC4GS V2/RC4GS​ Firmware