AT9S Pro Specifications

Dimension:
183*100*193mm(7.2”*3.9”*7.6”)
Battery Case Dimension:
116*36*32mm(L*W*H=4.57"*1.42"*1.26")
Weight:
0.88kg
Frequencies Band:
2.4GHz ISM(2400MHz~2483.5MHz）
Modulation Mode:
QPSK
Bandwidth:
5.0MHz
Spread Spectrum Mode:
DSSS&FHSS/CRSF
ACPR:
>38dBm
Transmission Power:
① DSSS&FHSS: <100mW(20dBm)
② CRSF: 10mW/25mW/100mW/500mW/1W/2W(Optional)
Operating Current:
① DSSS&FHSS: < 90mA@12V
② CRSF: Depends on the transmission power selected
Operating Voltage:
7.4-15.0V(8pcs AA battery, a 2S-3S LiPo or 18650 Lithium battery)
Control Range:
① DSSS&FHSS: 3400 meters in the air(Maximum range is tested in an unobstructed area free of interference)
② CRSF: Depends on the RX and TX from BLACKSHEEP
Channel Quantity:
10/12 (all twelve channels can be programmed)
Signal Output:
PWM, SBUS, PPM, CRSF
Adaptable Models:
Include all 120-degree and 90-degree swash-plate helicopters, all fixed wings, gliders, multirotors, RC cars, RC boats, and robots
Compatible Receivers:
12CH - R12DS, R12DSE, R12DSM
10CH - R9DS(Standard), R6DS, R6DSM
CRSF - RX from BLACKSHEEP
Storage Model Quantity:
15
Simulator Mode:
Yes, with the radio frequency off to save battery power
Screen:
2.8 inches 16 colorful screens, 240*320 pixels
Compatible ControlBoard Hardware Models:
Ardupilot, pix4, beta, Arduino, and Raspberry Pi, can be connected with SBUS signal
Operating Temperature：
-30° to 85° C

R9DS Specifications

Dimension:
43*24*15mm (1.69"*0.94"*0.59")
Weight:
10.5g (0.37oz)
Antenna Length:
145mm(5.71")
Channels Quantity:
9 channels for PWM signal output,
10 channels for SBUS&PWM signal output.
Signals:
SBUS&PWM
Operating Voltage:
3.6-12V
Operating Current:
38-45mA@5V
Frequencies Band:
2.4GHz ISM(2400MHz~2483.5MHz）
Spread Spectrum Mode:
DSSS&FHSS
Section Precision:
4096, 0.25us per section
Applicable Models:
Helicopter, Fixed-wing, Glider, Multicopter, Car, Boat, Robot
Control Distance:
3400 meters in the air, maximum range tested in unobstructed areas free of interference, and may vary depending on local regulations.
Telemetry:
Connect PRM-01 for model voltage telemetry.
Connect PRM-03 and flight controller PIX6, PIXHAWK, CrossFlight-CE, CrossFlight, CrossRace Pro, CrossRace, Mini Pix, TURBO PiX, or APM for OSD information telemetry.
Compatible Transmitter:
AT10II, AT10, AT9S Pro, AT9S, AT9