Dimension:
|
174.8*116.4*224.2mm (6.88"*4.58"*8.83)
|
Weight:
|
319g (11.25 oz)
|
Channels:
|
7 channels
|
Battery Case Dimension:
|
89*59*25mm (3.5” *2.32” *0.98)
|
Frequency:
|
2.4GHz ISM band(2400MHz~2483.5MHz)
|
Applicable Model Types:
|
Crawlers, Tanks, Caterpillars, Remote Controlled Lifebuoy, and other types of RC cars or boats, Robots
|
Modulation Mode:
|
GFSK
|
Spread Spectrum Mode:
|
FHSS&67-channel pseudo-random frequency sequence hopping
|
Memory:
|
30 models
|
Antenna Length:
|
106mm (4.17”)
|
Control Range:
|
600 meters(1968.5ft) (Maximum range tested in unobstructed areas free of interference)
|
LCD Screen:
|
128*64 resolution, LCD backlight
|
Operating Voltage:
|
4.8-15V, 6pcs of AA batteries or 2S-4S LiPo battery
|
Operating Current:
|
80-120mA
|
RF Power:
|
<20dbm
|
Channel Resolution:
|
4096 with regular jitter of 0.5us
|
Low Voltage Alarm:
|
Yes, when less than 7.2V or customized on a 2S-4S battery, low voltage alarm can be set for each model
|
Low RSSI Alarm:
|
Yes
|
Low Model Battery Voltage Alarm:
|
telemetry of maximum 8S (33.6V) model battery voltage
|
Compatible Receivers:
|
R7FG (std)/R8FGH/R8FG/R8EF/R8F/R6FG/R6F/R4FGM/R4F
|
CRSF Protocol Supported:
|
is compatible with TBS Crossfire by connecting the TBS Crossfire to the DSC port of the RC6GS V3
|
FPV Head Track Function:
|
Support
|
Simulator Function:
|
Support
|
Timer Function:
|
Support
|
Compatible Control Board Hardware Models:
|
Ardupilot, pix4, beta, Arduino, and Raspberry Pi, can be connected with SBUS signal
|
Operating Temperature:
|
-30° to 85° C
|
RC6GS V3 Specifications
Dimensions:
|
35*22*14 mm(1.38*0.87*0.55")
|
Weight:
|
6g (0.21 oz)
|
Antenna Length:
|
205mm(8.07")
|
Channel quantity:
|
7 channels
|
Signal Output:
|
PWM+PPM+SBUS
|
Model Application:
|
Cars/Boats/Robots
|
Frequency:
|
2.4GHz ISM band(2400MHz~2483.5MHz)
|
Spread Spectrum Mode:
|
FHSS, 67-channel pseudo-random frequency hopping
|
Voltage Range:
|
3-12V
|
Operation Current:
|
30mA (based on power voltage)
|
Control Distance:
|
600 meters on the ground
|
Real-time Telemetry:
|
The model voltage will display by connecting the wire to the ESC, battery, and Telemetry port of receiver R7FG, no extra module is needed. Telemetry of maximum 8S(33.6V) battery supported.
|
Gyro Mode:
|
Receiver built-in gyro
|
Compatible transmitter:
|
RC8X/RC6GS V3/RC6GS V2/RC4GS V2/RC6GS (3-position switch version)/ RC4GS (version with P.D AFTER 180101)/T8S/T8FB |
R7FG Specifications