NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
GPS
NEW
NEW
NEW
NEW
NEW
NEW
RC6GS V3 VS RC6GS V2
RC6GS V3 VS RC6GS V2 | ||
Contents | RC6GS V3 | RC6GS V2 |
Transmitter Chip | ARM M4 | ARM M3 |
Channels | 7 channels | 6 channels |
Model Storage Quantity | support 30 models storage | support 10 models storage |
FPV Head Track Function | Yes, can be set the FPV Head Track Function(3-axis or 2-axis track can be selected) in the DSC menu | Yes, but must upgrade the dedicated firmware(V6.3.2) for FPV Head Track Function, have not dedicated menu to set |
Timer Function | Yes | No |
D/R Switch | A switch can be set to switch D/R | cannot set a switch |
Dual Mix Programmable | A switch can be set to turn onor turn off PMIX01 and PMIX02 | cannot set a switch |
Low Voltage and RSSI Alarm | low voltage and RSSI alarm can beset independently for each model | 10 models can not set independently |
DSC Port | DSC menu: is default the Simulator Function,can be set as FPV Head Track Function(3-axis or 2-axis track can be selected),or TBS Crossfire Function | do not have the DSC menu: is default the Simulator Function, can be set as FPV Head Track Function(by connect the trainer cable to the DSC port) or TBS Crossfire Function(by connect the TBS Crossfire to the DSC port) |
Control Distance | 600m(1968.5ft) (Maximum range tested inunobstructed areas free of interference) | |
TBS Crossfire Function | compatible with TBS Crossfire by connectthe TBS Crossfire to the DSC port | |
Telemetry | Support signal, RSSI, transmitter voltage, receiver voltage andmaximum 8S (33.6V) model battery voltage telemetry | |
Cruise Control System | Support | |
Gyro Integrated | Support, HV Servo Supported | |
Subsidiary ID | Support maximum 10 binding receivers | |
Antiplug Protection | Support | |
USB Upgrade | Support | |
Compatible Receivers | R8F, R8EF, R7FG, R6FG, R6F, R4FGM, R4F |