Specifications
Aircraft
| Name:  | 400mm Brushless Soccer Drone | 
| Model:  | LDZ-A40 | 
| Takeoff Weight:  | 984.8g | 
| Dimensions:  | 402mm | 
| Applicable Age:  | Over 14 | 
| Material:  | Carbon Fiber (Frame), Plastic (Ball Shells, Battery Case) | 
| Working Modes: | Altitude-hold Mode, Stabilize Mode, Turtle Mode, and Air Mode | 
| Flight Time:  | 6 Minutes | 
| Flight Distance: | 3000 Meters  | 
| Flight Environment:  | Indoors/Outdoors | 
| Low Battery Alarm: | The alarm voltage is 22.0V by default. When the battery voltage is lower than 22.0V, the T12D will emit a beeping alarm. And, the drone will automatically land when the voltage reaches 21.5V. | 
| LED Light Switch: | LDF9A-A40 has a tail LED light and a ring light strip. They have 7 colors that can be switched, namely red, green, blue, yellow, purple, cyan, and white. Short-press the button on the light board to switch their light color or turn off the light. | 
Power System
| Motor: | SZ-SPEED 2207.5-1950KV Brushless Motors | 
| Propeller: | GEMFAN 5-inch (51466) Propellers | 
| Battery:  | Gensace 6S 22.2V 1400mAh 150C 31.08Wh Lipo Battery | 
| Flight Controller: | RadioLink flight controller F405, compatible with a receiver with SBUS or CRSF signal | 
|  ESC: | RadioLink 80A 4-in-1 ESC | 
| Transmitter: | RadioLink 12-channel transmitter T12D | 
| Receiver: | R16SM | 
| Output Frequency: | 2.4GHz ISM band(2400MHz~2483.5MHz) | 
| Transmitter Power:    | <100mW(20dBM)  | 
| Transmitter Operating Voltage:    | 7.4-15.0V DC | 
| Receiver Input Voltage: | 3-6V DC | 
| Control Distance:  | about 3000 meters in the air (actual distance depends on the flight environment) | 
| Simulator Supported:  | Beyond traditional simulators like Phoenix, the T16D features built-in simulator support (requires a firmware upgrade to V1.7.1). With no external dongle needed, connect to your computer via a Type-C cable to seamlessly support open-source simulators such as TRYP FPV, AeroFly, Uncrashed, Liftoff, FPV LOGIC, and Velocidrone - compatible with macOS and Windows systems. | 
Remote Control System
Charging System
| Charger:  | HOTA T6 | 
| Charge Power: | 0.1~15A@300W;PD 90W | 
| Discharge Power: | Internal Discharge: 30W(Balance port 10W); External Discharge: 700W | 
| Charging Input:  | DC 10-30V; PD 3.0/QC 20V | 
| Charging Current:  | DC 15A; PD 5A | 
| Power Supply:  | 0.1-15A@5-29V | 
| Balance Current: | 600mA | 
| Compatible Battery: | LiHV/LiPo/LiFe/Lilon/Lixx : 1~6S NiZn/NiCd/NiMH : 1~14S Smart Battery: 1~6S Lead Acid(Pb): 1~12S (2~24V)Eneloop: 1~14S | 
 简体中文
简体中文 English
English