Specifications

Weight &  Dimension
Dimension
37*37mm(1.46”*1.46”)
 
Weight
12.2g(0.43oz), 42.8g(1.5oz when all the connect wires included)
Hardware
Processor
STM32H743
 
Schedule Loop Rate
1000HZ
 
Frequency
480MHz
Sensor
Gyro & Accelerometer
BMI270
 
Barometer
SPL06
 
FRAM
128M, can store 2617 waypoints for multi-copters
 
Buzzer
1
 
Switch
None
Connector
Type
Combining socket interfaces and soldering pads, Support DJI/CADDX HD Digital Video Transmission Plug-and-play
 
ESC Connector
10PIN ESC connector, support voltage and current monitor, and ESC telemetry
 
BEC
5V&12V Dual BEC Built-in
 
Channel Output
12 channels Output
 
Mavlink UART
2(without RTS/CTS)
 
USB Port
1(Type-C)
 
GPS UART/I2C Port
1
 
RC In Signal Input
PPM/SBUS
 
RSSI Output
Support
 
OSD Module
OSD Module Integrated
 
ESC Protocol
PWM, DShot, and OneShot Protocol
 
DShot/OneShot Protocol
Support
 
RTK
Support
 
Redevelopment
Do not support
 
Input Voltage
2-6S
 
Input Current
5A
 
Relay(12V BEC)
A switch can be set as the 12V BEC switch, which is used to turn on or off the image transmission power supply by the transmitter directly.
Adaptable Models
2-8 Copters
10PIN ESC connector, support voltage and current monitor, and ESC telemetry
Operating Paramteters
USB Voltage
5V±0.3V
 
Operating Voltage
-30~85℃