R7EH-S, 2.4G 7 channels receiver, FHSS, use for Radiolink TX T4EU, T4EU-6, T6EHP-E, S-BUS, PPM and PWM signal is possible working at the same time.

How to match code with transmitter:

First, turn on the transmitter, then give power to receiver, there is a black button near the antenna, use a thin stick press the button two seconds and release, receiver light start blinking, after about 8 times blinking, match code success when receiver signal LED on!

S-BUS, PPM and PPM signal change：

Short press the ID SET switch two times within 1 second, the signal is changed from normal PWM to S-BUS or PPM. The green LED indicates the normal PWM and red&green LED indicates S-BUS or PPM signal.

Fail safe:

Receiver will output signal:throttle zero, other channels keep the last signal from transmitter when receiver can't receive signal from transmitter within 1 second.

FHSS, nice anti-interference.

1. Channel: 7CH

2. Max input voltage: 6V

3. Size: L*W*H: 50*24*15mm Weight: 11.4g

4. Current: 19-25mA (voltage 5V)

5. Signal output: S-BUS, PPM and PWM

PWM signal mode: Green LED, output 8 channels PWM signal.

SBUS/PPM signal mode: Both red and green LED on, CH1 output S-BUS signal, CH2 output PPM signal, CH3 to CH8 output PWM signal at the same time.