How to solve the problem that AT9S/AT10II display reversal, inversion, or blank screen after upgrading the firmware?
Since AT9S/AT10II launched, the LCD panel has been upgraded several times, and the drivers for the latest and old LCD panel are different. The latest new firmware is only applicable to the latest LCD panel. If your radio is with a previous LCD and has been upgraded with the latest firmware or is with the latest LCD panel and upgraded with previous firmware, there would possibly be problems with your LCD like reversal, inversion, or blank screen. This abnormal display can be restored by repairing the firmware with the driver.
If you encounter the display problem mentioned above after you upgrade the firmware, please open the battery cover of your radio and check the production date printed on the small label pasted in the battery holder. It’s a group of digits under the barcode. Starting from the left, the first digit is “the year”, the second and third digit is "the month", while the fourth and fifth digit is “the day”. An example is shown below:
The production date of this AT9S is Oct. 30, 2018.
There are two firmware solutions to this abnormal display problem of AT9S and AT10II respectively. You need to identify the suitable one depending on the production date of your radio.
AT9S：
① V1.2.9S (9488) for products before Aug. 2017 (production date)
You can download the V1.2.9 here:
http://www.radiolink.com.cn/firmware/transmitter/AT9S&AT9/
② V1.2.9S for products after Aug. 2017 (production date)
You can download the V1.2.9S here:
http://www.radiolink.com.cn/firmware/transmitter/AT9S&AT9/
AT10II：
① V1.3.0S (1) for products before Aug. 2017 (production date)
You can download the V1.3.0S (1) here:
http://www.radiolink.com.cn/firmware/transmitter/AT10II/
② V1.3.0S (2) for products after Aug. 2017 (production date)
You can download the V1.3.0S (2) here:
http://www.radiolink.com.cn/firmware/transmitter/AT10II/
If the production date unfortunately can’t be seen clearly, please kindly try both firmware based on your radio model. Restoration can be done with firmware upgrading for one time. Please stop upgrading the firmware once the display is normal and you can continue to upgrade other necessary firmware.
Note:
- The above firmware is ONLY for LCD panel restoration. If you don’t encounter such a display problem, please DO NOT upgrade this firmware.
- If you have changed the LCD panel or mainboard after purchasing AT9S or AT10II, please always consider the production date of the LCD panel instead of that of the whole product, which is in the battery holder as mentioned at the beginning.
For example:
If you just purchased a new accessory like an LCD panel recently from us, the upgraded firmware of restoration you need is the one applicable to the products manufactured AFTER Aug. 2017. If it’s the main board you changed, then should be BEFORE Aug. 2017. No matter what production date is printed under the bar code in the battery holder.