Method of how to install and activating the simulator program
Video tutorials in Chinese:
1. The content of the DVD
2. Choose the simulator(not recommend the FeiYing)，eg: real flight program
3. Install the program
4. Open the program and enter the serial number as it requires (you could Disconnect to internet from here)
If the serial number on your CD in not valid, please try the one in the next screenshot:
CODE for transmitter: 2831640-I3-014408
CODE for RF7: 23854273-R7-6168813977
5. Enter the following serial number according to the tips, and click OK in the end.
Note: The serial number is on the DVD
Part of the serial number:
Expansion Pack 1: 27418829-E1-5140106092
Expansion Pack 2: 22850737-E2-3850104361
Expansion Pack 3: 78396652-E3-7440103834
Expansion Pack 4: 13144997-E4-6630107326
Expansion Pack 5: 78779710-E5-8790101628
Expansion Pack 6: 67920032-E6-7880104031
Expansion Pack 7: 90638630-E7-7730148192
Expansion Pack 8: 64658044-E8-1910121237
6. If the following page display, just click cancel and close the pop-up window
7. If you disconnected to internet from step 5, then need you connect to internet and restart the program. Click the “real flight” button, it requires to connect the radio and dongle.
8. Connect the radio and receiver and dongle:
① Make sure the receiver signal is PPM output,
② Make sure the dongle button is on the correspondingly position as the program you use, for example, we choose the real flight, it requires the button on level 2 as the picture show (Note: need you reinsert the dongle after adjusting the button position, otherwise the program cannot recognize it.)
Wireless connection:
Connection with cables
Enter the program and play
